The Premium WheelTracker

The WheelTracker is manufactured out of about 93 percent stainless steel and it is used to test the wearability and water damage potential of asphalt mixes.

By simulating roadway conditions in a controlled environment and using a Linear Value Displacement Transducer to measure deformation of a sample over 11 equally spaced points at 158 lbs. of pressure (adjustable).

Features

The Balluff Linear Variable Differential Transformer (LVDT) transducer supplies robust and accurate rut depth measurements. It works with the index plate to generate root-mean-square error (RMSE) values significantly below AASHTO standards for rut depth measurements.

The Index Plate provides laser accuracy for location of rut depth measurements and works with the Balluff LVDT transducer to generate RMSE values significantly below AASHTO standards for rut depth Measurement

The WheelTracker has a variable-speed motor and slider-crank mechanism that generates RMSE values significantly below AASHTO standards for sinusoidal motion, and lasts longer than a Scotch yoke mechanism.

Temperature control allows you to test at a variety of temperatures, from 77oF to 158oF (25oC to 70oC).

TroxLiftTM provides a compact lifting method and is easy to use. TroxSafeTM stops the machine quickly to prevent injury, and rapidly resets to allow testing to continue.

Specifications

MEASUREMENT INFORMATION
US Standards AASHTO T324 (current and proposed)
Rut Depth Measurement 0 to 1.57 in (0 to 40 mm)
Water Temperature 59oF to 158oF (15oC to 70oC)
Wheel Dimensions (D x W) 7.99 x 1.85 in (203 x 47 mm)
Wheel Weight 158.5 lb (71.89 kg) ±1
Wheel Speed 36 to 60 passes per minute (PPM)
Measurement Location Eleven equally spaced positions over 9 in (228.6 mm)
Measurement Frequency <4,000 passes = every 20 passes ≥4,000 passes = every 50 passes
Real-Time Display Temperature, maximum rut depth, speed, test duration, rut profile
MODEL SPECIFICATIONS
Premium
Dimensions

(L x W x H)

64 x 54 x 56.5 in                      (162.56 x 137.16 x 143.51 cm)
Weight 1,500 lb (680.39 kg)
Motor 2 hp
Electrical Three-phase
OPERATIONAL REQUIREMENTS
Water Must comply with US Environmental Protection Agency (EPA) drinking water standards
Drain ≤14 in (355.6 mm) from floor
Air 90 to 120 psi
Electrical 208/230 VAC 50 to 60 Hz

The testing environment temperature can be set between 15°C-70°C and cannot be set less than room temperature. The machine has three testing modes: wet, dry, and an optional air heat. The whole system is controlled by a PC & PLC system with easy-to-use, custom-designed software on a Windows computer. If you have any questions about the WheelTracker, please contact your Troxler representative.