Testquip Brick Saw and Tile Saw
Customized for quick and accurate sample cutting!
Brick Saw
The Testquip Tile Saw is customized with a 16″ blade for 6″ cuts. Once the specimen is inserted, simply slide the table left or right in the preconfigured thickness offsets (50mm and 62 mm default).
Tile Saw
The Testquip Brick Saw features a 0.050″ thick 10″ blade to meet test standard notch cut thickness requirements. A custom spring clamp fixture is mounted to the back of the table for quick and secure sample loading. It includes spacer block to allow cutting SCB (15mm default) and DCT specimen notch cuts without adjusting the blade.
Options
Brick Saw – Notch cuts made easy!
- MK Diamond MK-101 Pro
- Features 0.050″ thick 10″ blade to meet test standard notch cut thickness requirements
- Custom spring clamp fixture mounted to back of table for quick and secure sample loading
- Includes spacer blocks to allow cutting SCB (15mm default) and DCT specimen notch cut without adjusting the blade
- Make SCB half cuts and DCT flat cuts
- Includes machined spacer block for spot checking blade alignment
- LSU SCB (ASTM D8044) spacer blocks are available
Tile Saw – disk cuts made easy!
- Diamond products CC500M XL-II
- Customized with 16″ blade for 6″ cuts
- Operates on 230 or 120VAC
- Customer fixture mounted to second stand-alone table; keeping original table for other cutting
- Fixture holds specimens 4″ to 6″ in diameter
- Once the specimen is inserted, simply slide the table left or right and lock in the preconfigured thickness offsets (50mm and 62 mm default)
